Project Development Stages

#

Concrete Structure System:

  • Excavation of the project site according to approved plans
  • Watering the ground after excavation is completed
  • Compacting the ground with a 25-ton roller
  • Pouring a clean layer with a thickness of 6 to 10 cm
  • Waterproofing the foundation box
  • Using a full foundation slab system for the entire building
  • Resistant concrete for the foundation slab
  • Reinforcement steel from SABIC or Al-Wataniya
  • Pouring columns with resistant concrete
  • Waterproofing the columns with hot bitumen
  • Backfilling the columns with sub-base
  • Watering the column backfill
  • Compacting the column backfill with a 9-ton roller
  • Pouring the tie beams with resistant concrete
  • Waterproofing the tie beams with bitumen
  • Backfilling the tie beams with sub-base
  • Watering the backfill
  • Compaction of foundation beams.
  • Casting water and sewage tanks with resistant concrete.
  • Laying 8mm steel reinforcement for parking areas.
  • Casting parking area with a clean concrete layer, 15 cm to 20 cm thick.
  • Casting columns with ready-mix concrete (8 bags).
  • Casting slabs with ready-mix concrete (7 bags).
  • External walls and apartment partitions constructed with insulated blocks (40x20x20 cm) from Al-Amoudi or Al-Khayyat.
#

Plumbing Works

  • 8-inch sewer pipes, 16mm thickness, Gulf standard (Ground level)
  • 1-inch sewer pipes, 16mm thickness, Gulf standard (Suspended)
  • Inspection chambers, 16 inches, 16mm thickness if laid on the ground
  • Bathroom and kitchen drainage, 4 inches, 40 PSI, Gulf standard
  • Washbasin drainage, 2 inches, 40 PSI
  • 1 1/4-inch hot water supply lines
  • Water heater extensions
  • 1 1/4-inch German hot water wall valve
  • Stainless steel German floor drains
  • Independent upper water tank, 1500 liters, fiberglass, 4 layers; lower tank, 10 tons
  • Ceramic bathroom sets, each set priced at 1000 SAR
#

Electrical Works

  • Foundation for electrical works before concrete pouring (Red Tayyar)
  • Installation of 2-inch medium pressure conduit pipes for cables
  • Installation of Alfanar boxes, depth (7x7)
  • Installation of Hanjour Tayyar conduits (14mm and 16mm)
  • Wires from Bahra Cable Company
  • Cables from Saudi Cable Company (35mm)
  • Cables from Saudi Cable Company (25mm) for apartments with 3 rooms
  • Circuit breaker type Ultra
  • Panel board with 24 lines, type Reesan
  • Exhaust fans 25x25 for bathrooms and kitchens
  • LED lighting system for rooms
  • Switches and sockets from Alfanar Company
  • Independent meter for each apartment
#

Roofing Works:

  • Thermal insulation using foam (concrete) with a thickness of 5 to 10 cm, depending on the level
  • Cement skirting of 10 cm height on walls after foam application
  • Primer base coat
  • Waterproofing with a 4mm membrane roll
  • Gravel skirting, 30 cm high, with aluminum fixed with screws and silicone
#

Painting Works:

  • Putty (Finate)
  • Ready-made putty
  • Final finish with plastic paint
  • Quarter gloss (Al-Jazeera Paints) for interiors
  • Jeddah Paints for exteriors
#

Woodwork:

  • Main apartment door made of premium-grade Magno or Meranti wood, finished with sealer paint, lock, and handle
  • Interior doors are pressed oak wood with frames made from Swedish wood
  • Handles and locks are Turkish
#

Gypsum Works:

  • Building entrance: Full drop ceiling system
  • Majlis, living room, and other rooms: Full drop ceiling
  • Bathrooms and kitchens: Cornice only
#

Aluminum Works:

  • Aluminum type: Alupco or Aljabriya
  • Glass: Saraya double glass, reflective, priced at 300 SAR per square meter
#

Air Conditioning:

  • Split unit installation based on the apartment’s requirements
  • Preparation for window air conditioners with bird protection
 
#

Flooring:

  • Ceramic tiles 60x60 cm, priced at 20 SAR per square meter
  • Qishani tiles, priced at 20 SAR per square meter
#

Building Works

  • Using 6.5 cm black blocks for tanks and septic tanks by Al-Amoudi Company.
  • Using insulated red blocks for repetitive floors, annexes, and rooftops.
#

Plastering Works

  • Using Riyadh sand and iron mesh between columns and blocks, followed by cement splatter.

Your Dream of the Perfect Home Begins Here

Your Dream of the Perfect Home Begins Here